SolarZig

Measurement system for verification and testing of photovoltaic plants

Solarzig is a professional measurement system designed to run verification tests of the efficiency of a photovoltaic system.

The use of newer technologies (wireless sensors, voltage probes with magnetic hooking, current clamps with linearized response curve) has enabled the development of an high performance measurement system with at the same time an easy to use tool.

At the end of the measurement is possible with simple steps to produce and printing all the documents required for the certification of the test.

 

- Magnetic hooking voltage probes

- Digital volt-amperometric clamps with linearized current curve

- Recording of the entire measurement session in non-volatile memory unit

- Automatic creation of pdf documents (test report)

- Easy upgrade to Photozig system (test of PV array performance)

Advantages of a PC-based instrument

- Graphics and processing capabilities far superior to a stand-alone tool

- Simplification of the measure; all data during the test are replicated in the memory of your PC, you do not require any additional procedure of downloading

- Extreme versatility; it is sufficient to change the type of sensors and use the appropriate software to obtain a new complete measuring system suitable for a different application (for example Photozig system or Thermozig system)

- Instrument always up to date. Since the calculations are performed by software in PC, in case of any developments concerning new regulations or new instrument features options you just load the latest version of the program, provided free of charge to Optivelox's customers

SolarZig

The Solarzig system includes software and all accessories necessary for verification of the performance of a photovoltaic plant. The PC is not included in the supply, may be ordered as option.

Notes:
The system includes AC and DC volt-amperometric clamps with 400 A max and it is recommended for the verification of PV plants up to 250 kW. For higher powers, are available the AC clamp FE03H (3000 A max) and the DC clamp FE04H (1600 A max).

To transform the system Solarzig in Photozig is sufficient to add a radio modem RM01 and a curve tracer IV01.

Solarzig includes:

- 1x Datalogger DL02 (complete with manual, software and PC interface cable)
- 1x Meteo Station SM01-P (with a radio modem RM01-P included)
- 1x Radio Modem RM01-P (with internal rechargeable battery)
- 1x Front End FE03 (AC volt-amperometric clamp, 600V/400A)
- 1x Front End FE04 (DC volt-amperometric clamp, 1000V/400A)
- 2x Couple of voltage probes with magnetic hookong
- 1x AC power supply
- 1x Solarzig Reference Guide
- 1x Software suite PVtest + PVreport
- 1x Carrying case

SolarZig LT

SolarZig LT is the preferred system for people that have already their instruments for the measurement of electrical power or who otherwise wish to postpone the purchase of volt-amperometric clamps. The PC is not included in the supply, may be ordered as option.

Solarzig LT includes:

- 1x Datalogger DL02 (complete with manual, software and PC interface cable)
- 1x Meteo Station SM01-P (with a radio modem RM01-P included)
- 1x Radio Modem RM01-P (with internal rechargeable battery)
- 1x AC power supply
- 1x Solarzig Reference Guide
- 1x Software suite PVtest + PVreport
- 1x Carrying case

Top